Inner Circle Welcome | Login | Register
Country flag English, Australia [ Change country + Language ]
eDev II - System Configurations
| Share

eDev II - System Configurations  

Subscribe to all products in this area

Converting to the eDev™ II and other Next Generation systems has been made more efficient with software upgrades ensuring no current hardware is obsolete.


Blast Box 610/610C
The Blast Box 610 provides the voltage and command to fire the detonators in programmed sequence. It can be upgraded to eDev™ II by a firmware change.

i-kon™ CEBS
The i-kon™ CEBS (Centralised Electronic Blasting System) allows underground mining operations to initiate eDev™ II and i-kon™ electronic detonator blasts remotely, from a convenient and safe control point usually on the surface.

eDev™ II Tester
The Tester offers inherently safe testing, by communicating with and testing the eDev™ II detonators at the face after the scanning process.

Scanner 125
A barcode scanner that reads unique ID numbers on the detonator flag tags, and downloads the detlist via Bluetooth® to the Tester and later to the Blast Box. Scanner 125, in use with eDev™ detonators, can be upgraded to eDev™ II by a firmware change.

Blast Design Software
Orica’s SHOTPlus™ Blast Design Software produces printed blast plans, useful at the face with the eDev™ II system.

eDev™ II Detonator
Accurate and fully programmable electronic detonator.

eDev™ II Connector
Designed for at-face efficiency, the new connector carries signals between the detonator and the harness wire.

Duplex Harness Wire
Faster and easier to use, the duplex wire connects detonators with the Blast Box.