Inner Circle Tervetuloa | Kirjaudu | Rekisteröidy
Maan lippu Suomi, Finland [ Vaihda maa + kieli ]
eDev II - System Configurations

eDev II - System Configurations  

Subscribe to all products in this area

Converting to the uni tronic™ 600 and other Next Generation systems has been made more efficient with software upgrades ensuring no current hardware is obsolete. 

Blast Box 610

The Blast Box provides the voltage and command to fire the detonators in programmed sequence. The current Blast Box 610 is a standalone box for firing eDev™ blasts via a wired connection to the detonators. It can be upgraded to eDev™ II by a firmware change

eDev™ II Test Box

The Test Box offers inherently safe testing, by communicating with and testing the eDev™ II detonators at the face after the scanning process.


Scanner 125

A barcode scanner that reads unique ID numbers on the detonator flag tags, and downloads the detlist via Bluetooth® to the Test Box and later to the Blast Box. Scanner 125, in use with eDev™ detonators, can be upgraded to eDev™ II by a firmware change.

 

Standard items

 
 
 
 
 
 
eDev™ II Detonator
Accurate and fully programmable electronic detonator.
 
 
 
 
Duplex Harness Wire
Faster and easier to use, the duplex wire connects detonators with the Blast Box.
 
 
 
 
eDev™ II Connector
Designed for at-face efficiency, the new connector carries signals between the detonator and the harness wire.
 
 
 
 
Blast Design Software
Orica's SHOTPlus™ Blast Design Software produces printed blast plans, useful at the face with the eDev™ II system.
 
 
 
 
i-konTM CEBS
The i-kon™ CEBS (Centralised Electronic Blasting System) allows underground mining operations to initiate eDev™ II and i-kon™ electronic detonator blasts remotely, from a convenient and safe control point usually on the surface.