eDev II - System Configurations
Converting to the uni tronic™ 600 and other Next Generation systems has been made more efficient with software upgrades ensuring no current hardware is obsolete.
.
Blast Box 610
The Blast Box provides the voltage and command to fire the detonators in programmed sequence. The current Blast Box 610 is a standalone box for firing eDev™ blasts via a wired connection to the detonators. It can be upgraded to eDev™ II by a firmware change
eDev™ II Test Box
The Test Box offers inherently safe testing, by communicating with and testing the eDev™ II detonators at the face after the scanning process.
Scanner 125
A barcode scanner that reads unique ID numbers on the detonator flag tags, and downloads the detlist via Bluetooth® to the Test Box and later to the Blast Box. Scanner 125, in use with eDev™ detonators, can be upgraded to eDev™ II by a firmware change.
Standard items
eDev™ II Detonator
Accurate and fully programmable electronic detonator.
Duplex Harness Wire
Faster and easier to use, the duplex wire connects detonators with the Blast Box.
eDev™ II Connector
Designed for at-face efficiency, the new connector carries signals between the detonator and the harness wire.
Blast Design Software
Orica's SHOTPlus™ Blast Design Software produces printed blast plans, useful at the face with the eDev™ II system.
i-konTM CEBS
The i-kon™ CEBS (Centralised Electronic Blasting System) allows underground mining operations to initiate eDev™ II and i-kon™ electronic detonator blasts remotely, from a convenient and safe control point usually on the surface.